WM Plastics Lustre inks give a rich metallic appearance and are good for light colored garments, dark garments with the use of an underbase, and wet-on-wet printing.  Lustre inks have good hand, great coverage and easy printability.

Mesh counts of 86 and lower are recommended. 

Item #I10-1113

(FKA Item:  25-3111)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.

WM Plastics Lustre inks give a rich metallic appearance and are good for light colored garments, dark garments with the use of an underbase, and wet-on-wet printing.  Lustre inks have good hand, great coverage and easy printability.

Mesh counts of 86 and lower are recommended. 

Item #I10-1115

(FKA Item:  25-5111)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.

WM Plastics Lustre inks give a rich metallic appearance and are good for light colored garments, dark garments with the use of an underbase, and wet-on-wet printing.  Lustre inks have good hand, great coverage and easy printability.

Mesh counts of 86 and lower are recommended. 

Item #I10-1107

(FKA Item:  25-7011)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.

WM Plastics Lustre inks give a rich metallic appearance and are good for light colored garments, dark garments with the use of an underbase, and wet-on-wet printing.  Lustre inks have good hand, great coverage and easy printability.

Mesh counts of 86 and lower are recommended. 

Item #I10-1114

(FKA Item:  25-4111)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.

WM Plastics Lustre inks give a rich metallic appearance and are good for light colored garments, dark garments with the use of an underbase, and wet-on-wet printing.  Lustre inks have good hand, great coverage and easy printability.

Mesh counts of 86 and lower are recommended. 

Item #I10-1111

(FKA Item:  25-1111)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.