Ulano
ULANO BLUE POLY-2 is an indirect gelatin-based film that offers superior fine detail reproduction and sharp printing edges, uniform stencil thickness, predictable standardized exposures, close control of stencil thickness and ink deposit, fast and simple stencil production and easy stencil removal. Its a completely solvent resistant, medium thickness emulsion on a 2-mil optically flat polyester backing that combines wide exposure latitude with excellent resolution. Ideal for general screen printing work. Resolution: 75 - 100 microns (3 - 4 mils)
Ulano
ULANO CDF VISION is a diazo dual-cure capillary film specially formulated to control mesh penetration and enhance photo-polymerization, resulting in sharp printing shoulders and mechanical durability. Particulate-size control reduces granularity effects for optimal resolution and definition. Texturing agents impart a micro-structural pattern to the bottom of the stencil, minimizing hydrostatic attraction to the printing stock under conditions of high humidity, and electrostatic attraction under low humidity conditions. CDF Vision is compatible with UVs, vinyls, and virtually all solvent-based inks. Comes in 20μ and 35μ thickness.
Ulano
ULANO CDF/QT is a pure photopolymer sensitized capillary film ranging in thicknesses of 30µ - 400µ and is ideal for the production of thick stencils for specialty printing needs, including high density, puff and lenticular effects for imprinted sportswear; peelable solder masks in the electronics industry; false mosaic and leading effects for glass and ceramic decorating; screen printed gaskets and seals, and many other manufacturing and decorating applications requiring ultra-thick ink deposits with non-aggressive solvent inks and pastes. CDF/QT is adherable with water or ULANO QTX emulsion.
Ulano
ULANO EZ FILM is a capillary film intended for standard textile printing and priced to be an economical alternative to direct emulsion in material cost, and because it offers significant savings in labor and production time. It adheres perfectly, dries faster than direct emulsion, and exposes very quickly. EZ FILM can be adhered with plain water or ULANO QTX emulsion. It should be used with non-aggressive solvent-based inks and mild wash up solvents. Screen openers and aggressive solvents will make reclaiming more difficult.
EZ FILM 30 is ideal for mesh counts of 230 and higher.
Ulano
ULANO EZ FILM ORANGE 50 is a capillary film intended for standard textile printing and priced to be an economical alternative to direct emulsion in material cost, and because it offers significant savings in labor and production time. It adheres perfectly, dries faster than direct emulsion, and exposes very quickly. EZ FILM can be adhered with plain water or ULANO Orange emulsion. It should be used with non-aggressive solvent-based inks and mild wash up solvents. Screen openers and aggressive solvents will make reclaiming more difficult.
EZ FILM 50 is ideal for mesh counts lower than 230.
*ALL PRODUCTS ARE LISTED ALPHABETICALLY