Aquo Chemicals
-
Aquo
Visit product page →GENERAL DESCRIPTION
Aquo Screen Wipes are an environmentally friendly solution for your tough clean up jobs. They are intended for screen printing applications. They are designed primarily for plastisol and water-based ink. Ideal for the following: production color changes, ink clean-out for screens, removing ink from frames, cleaning equipment, squeegees and flood bars, spatulas, buckets, sample department, and ink mixing department.
ADVANTAGES
- Environmentally friendly
- Pleasant Odor
- Water-Based Formulation
- Easy and convenient to use
- Tough enough to cut through ink on all substrates
- Reduce the number of shop rags used
- 150 wipes per container
- Products have no hazardous components, ships non-hazardous
- Air Quality Management District (AQMD) Compliant, Low VOC (Volatile Organic Compound) formulation
- Does not require Reporting to Agencies (not regulated) no hazardous Air Pollutants (HAPS)
AVAILABLE PACK SIZES: 1 GAL. (150 WIPES), 4x1 GAL. CASE
-
Tech Support Screen Printing Supplies
Aquo Charge Pink Dehazer/Degreaser, "The Pink Stuff"
Tech Support Screen Printing Supplies
Visit product page →This product is a viscous degazer and degreaser that is designed for a variety of inks. "The Pink Stuff" cleans mesh of stains with less noticeable odor and works better than most hazardous stain removers. "The Pink Stuff" leaves your fabric free of all oils and contaminants, which will reduce the incidence of pinholes.
- Before using remove all ink residue and emulsion from the screen.
- Brush product on the ink side of a WET screen, Agitate on both sides of the screen with a brush or pad and set aside for approximately 1 to 10 minutes.
- High pressure water rinse, spraying from bottom to top, on the print side of the screen. Reverse screen and high pressure rinse, then use low pressure water and flood rinse the complete screen. Allow screen to dry before coating.
