A premium mulitpurpose ink, extremely popular with automatic & manual printers. Excellent wet on wet printing with no build up and will not water down. Excellent edge definition and printability. Black Creme has a great coverage and clears well.

Item # I10-2280A  (formerly known as Black Smooth 25-0822)

Fusion/Curing:3  25ºF/160ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390ºF/195ºC for 8 seconds.
325ºF/160ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time

WM Plastics All Purpose (AP) inks are formulated to be directly printed onto white or light colored garments, or be used with an underbase on darker colored garments.  WM Plastics standard inks have good hand, great coverage and easy printability. 

Item #J-B-6056-AP

Estimated PMS# 711C

(FKA Item:  25-9006)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.

Brite White is our economical, general purpose white that provides good coverage and some bleed resistance on those pesky cotton/polyester blends. Even though this white is categorized as economical, its soft body still allows it to be printed as easily as our premium whites. Use on 50/50 and 100% cotton garments. 

Item #I-10-9521-A  (fka Tech White HO 25-1259)

Fusion/Curing:  325ºF/175ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390ºF/195ºC for 8 seconds.

WM Plastics All Purpose (AP) inks are formulated to be directly printed onto white or light colored garments, or be used with an underbase on darker colored garments.  WM Plastics standard inks have good hand, great coverage and easy printability. 

Item #J-B-7426-AP

Estimated PMS# 1815C

(FKA Item:  25-7426)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.

Crystalina is made of an iridescent translucent mylar flake that is suspended in a clear plastisol base. The clear base has a much lower loading of flakes so there is a greater amount of clear base. This allows the under color to show through when this ink is overprinted. Crystalina is also known as “Shimmer” and “Yellow Sparkle.”  Because of the nature of the flake, it gives the overprinted color a shinny, sparkly, rich look. Crystalina is very similar to glitter. it gives the overprinted color a shinny, sparkle.  Mesh counts of 40 and lower are recommended.

Item #:  I10-9906-A

(fka 25-4011)

 Fusion/Curing:  325ºF/160ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390ºF/195ºC for 8 seconds. Because metallics and lustres reflect it may be necessary to increase temperature and dwell time.

WM Plastics All Purpose (AP) inks are formulated to be directly printed onto white or light colored garments, or be used with an underbase on darker colored garments.  WM Plastics standard inks have good hand, great coverage and easy printability. 

Item #J-B-3125-AP

Estimated PMS# 7555C

(FKA Item:  25-5213)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.

WM Plastics All Purpose (AP) inks are formulated to be directly printed onto white or light colored garments, or be used with an underbase on darker colored garments.  WM Plastics standard inks have good hand, great coverage and easy printability. 

Item #J-B-4030-AP

Estimated PMS# 7733C

(FKA Item:  25-8204)

Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.