WM Plastics
Crystalina is made of an iridescent translucent mylar flake that is suspended in a clear plastisol base. The clear base has a much lower loading of flakes so there is a greater amount of clear base. This allows the under color to show through when this ink is overprinted. Crystalina is also known as “Shimmer” and “Yellow Sparkle.” Because of the nature of the flake, it gives the overprinted color a shinny, sparkly, rich look. Crystalina is very similar to glitter. it gives the overprinted color a shinny, sparkle. Mesh counts of 40 and lower are recommended.
Item #: I10-9906-A
(fka 25-4011)
Fusion/Curing: 325ºF/160ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390ºF/195ºC for 8 seconds. Because metallics and lustres reflect it may be necessary to increase temperature and dwell time.
View Info SheetWM Plastics
WM Plastics Glitter inks are designed to stand out on garments by providing a unique appearance that will catch anyone's eye. Glitter inks have a larger flake than Lustre inks, giving it more of a glitter appearance as opposed to metallic. Glitter inks have good hand, great coverage and easy printability. Mesh counts of 40 and lower are recommended.
Item #I10-1102-A
(fka 25-2011)
Fusion/Curing:
325ºF/160ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390ºF/195ºC for 8 seconds. Because metallics and lustres reflect it may be necessary to increase temperature and dwell time.
View Info SheetWM Plastics
WM Plastics Glitter inks are designed to stand out on garments by providing a unique appearance that will catch anyone's eye. Glitter inks have a larger flake than Lustre inks, giving it more of a glitter appearance as opposed to metallic. Glitter inks have good hand, great coverage and easy printability. Mesh counts of 40 and lower are recommended.
Item #I10-1103-A
(fka 25-3011)
Fusion/Curing:
325ºF/160ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390ºF/195ºC for 8 seconds. Because metallics and lustres reflect it may be necessary to increase temperature and dwell time.
View Info SheetWM Plastics
WM Plastics All Purpose (AP) inks are formulated to be directly printed onto white or light colored garments, or be used with an underbase on darker colored garments. WM Plastics standard inks have good hand, great coverage and easy printability.
Item #J-B-3303-AP
Estimated PMS# 1375C
(FKA Item: 25-3033)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info SheetWM Plastics
High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #JC-2860-HO
Estimated PMS# 286C
(FKA Item: 25-0682)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
WM Plastics
WM Plastics High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #JB-7109-HO
Estimated PMS# 1655C
(FKA Item: 25-9017)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info SheetWM Plastics
WM Plastics High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #JB-6056-HO
Estimated PMS# 711C
(FKA Item: 25-6506)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info SheetWM Plastics
WM Plastics High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #JB-2065-HO
Estimated PMS# 439C
(FKA Item: 25-5602)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info SheetWM Plastics
WM Plastics High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #JN-4342-HO
Estimated PMS# 567C
(FKA Item: 25-2434)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info SheetWM Plastics
WM Plastics High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #JB-2310-HO
Estimated PMS# Cool Gray 10C
(FKA Item: 25-0132)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info SheetWM Plastics
WM Plastics High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #I11-8531-HO
Estimated PMS# 3538C
(FKA Item: 25-1358)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info SheetWM Plastics
WM Plastics High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
Item #I11-8532-HO
Estimated PMS#802C
(FKA Item: 25-2358)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
View Info Sheet*ALL PRODUCTS ARE LISTED ALPHABETICALLY