WM Plastics Lustre inks give a rich metallic appearance and are good for light colored garments, dark garments with the use of an underbase, and wet-on-wet printing. Lustre inks have good hand, great coverage and easy printability.
Mesh counts of 86 and lower are recommended.
(FKA Item: 25-1111)
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.View Info Sheet
*ALL PRODUCTS ARE LISTED ALPHABETICALLY