Tekmar
- Previous
- Page 1 of 2
- Next
-
Tekmar
Visit product page →1500 series: A large stainless steel screen and arm allow cleaning of any shape garment. The super powerful vacuum unit will dry the heaviest fabrics and vent away the chemical vapors.
2000 series: The powerful 2-speed vacuum motor will instantly remove airborne contaminants from the work area that are generated by the spot cleaning process. The secondary stainless steel chemical shield vacuums away all over-spray that it captures.
-
Tekmar
Visit product page →Tekmar Scorch Remover instantly removes light to medium scorching from tees and sweats. It is simply sprayed on the scorched areas and then the garment is run back through the dryer. Scorch Remover also works on sun discoloration.
-
Tekmar
Visit product page →Tekmar TB-10 is designed to be sprayed through an adhesive applicator. It affords tremendous hold down for both tees and sweats, and has a tack time that rivals aerosol solvent based adhesives. Adhesive can also be quickly reactivated by wiping over with a damp sponge, giving maximum use and minimizing reapplication.
*FREEZABLE SUPPLY ALERT*
Freezable supplies are not able to ship when overnight temperatures are below freezing (28 degrees). This is because the chemicals will be neutralized, thus rendered ineffective. This includes all liquid emulsions, liquid emulsion removers and a few water-based products. Our policy is to hold the item(s) on “weather back-order” until the weather (in our area and yours) is above freezing.
As an option, we can offer an alternative product (such as capillary film, emulsion remover powder concentrate, or aerosol adhesive). Freezable supplies are available for local pick-up.
Contact us with questions: +1 (888) 600-6789 / sales@techsupportsps.com -
Tekmar
Visit product page →Tekmar TB-AR Orange is a citrus solvent that can be used at full strength or can be diluted for various uses. It quickly removes adhesive residue, ink, grease and oil along with dirt and grime. Works great on all Tekmar waterbased adhesives.
-
Tekmar
Visit product page →Tekmar TB-EZ is a high-strength, waterbased adhesive formulated specifically for polyester performance fabrics.
*FREEZABLE SUPPLY ALERT*
Freezable supplies are not able to ship when overnight temperatures are below freezing (28 degrees). This is because the chemicals will be neutralized, thus rendered ineffective. This includes all liquid emulsions, liquid emulsion removers and a few water-based products. Our policy is to hold the item(s) on “weather back-order” until the weather (in our area and yours) is above freezing.
As an option, we can offer an alternative product (such as capillary film, emulsion remover powder concentrate, or aerosol adhesive). Freezable supplies are available for local pick-up.
Contact us with questions: +1 (888) 600-6789 / sales@techsupportsps.com -
Tekmar
Visit product page →Tekmar TB-HV is a waterbased pallet adhesive that can be hand applied directly to the pallet. It contains no solvents or hazardous ingredients. TB-HV is heat stable up to 700F and can withstand repeat flashing without losing its tack.
*FREEZABLE SUPPLY ALERT*
Freezable supplies are not able to ship when overnight temperatures are below freezing (28 degrees). This is because the chemicals will be neutralized, thus rendered ineffective. This includes all liquid emulsions, liquid emulsion removers and a few water-based products. Our policy is to hold the item(s) on “weather back-order” until the weather (in our area and yours) is above freezing.
As an option, we can offer an alternative product (such as capillary film, emulsion remover powder concentrate, or aerosol adhesive). Freezable supplies are available for local pick-up.
Contact us with questions: +1 (888) 600-6789 / sales@techsupportsps.com -
Tekmar
The ideal replacement for aerosol adhesives. Snaps easily onto a special 1 gallon bucket. Fully adjustable for both fluid and air flows, the stainless steel tipped spray gun utilizes HVLP technology, allowing the application of a perfect mist coating of adhesive, while minimizing overspray. Compact, quiet, economical and fully assembled.Visit product page → -
Tekmar
Visit product page →The TG125 is an affordable gun with deluxe features normally found on guns costing twice as much. Included is a fully adjustable nozzle to allow use on even the most delicate fabrics with virtual ring-proof cleaning. The TG125 is a great gun for removing screen printing smudges and ink marks. It is also great for retail stores for removal of dirt, oil and make up.
The TG125 can be equipped with a Direct Feed and an Air Dryer for high speed spot cleaning.
-
Tekmar
Visit product page →The TG200 has a super resilient aluminum case with double ground electrical protection. The high output silicone oscillation motor generates a powerful stream of cleaning fluid to flush out the toughest stains and soils. Plain and simple this gun is a work horse!!
Often called “old faithful” the TG200 is an updated version of the all metal classic gun design. As with the TG125 and TG300 this gun comes complete with the target adjustable nozzle. It is also available with the air dryer and direct feed hose attachments.
-
Tekmar
Visit product page →We are pleased to introduce our new Spot Cleaning Gun the TARGET TG 300. This gun represents a major advancement in gun technology. The pump design incorporates a system that allows an increase in fluid stream with no increase in fluid consumption. This allows for faster, more complete cleaning, which lowers production costs and reduces the operator's exposure time. -
Tekmar
Visit product page →The all new Target TG350 Pro Series Spot Cleaning gun is a quantum leap forward in spot cleaning technology. From it’s precision adjustable nozzle to the integrated high speed air drying system, this high power, extended cycle gun sets the standard for spot cleaning today. The heavy duty Air Cooled drive unit has enough power to remove the toughest screen printing inks, stains and oil. It’s quite run technology and weight distribution design greatly reduces operator fatigue associated with conventional guns. -
Tekmar
Visit product page →Tekmar TS-1 is a high speed, non-flammable spotter for the toughest industrial type stains including grease, oil, dirt, marking pencil, lipstick, cosmetics and other soils. It is safe on virtually all fabrics including silks and satins. TS-1 contains a revolutionary additive that allows the soil to be encapsulated for a more complete and efficient cleaning.
- Previous
- Page 1 of 2
- Next